Skip to content
Keep your boiler running safely and efficiently

Boiler repairs and servicing in Bristol

A regular service catches small faults before they become expensive breakdowns. We diagnose problems fast, fix them right, and make sure your boiler meets current safety standards.

What's included in a service

  • Full boiler inspection and safety checks
  • Flue gas analysis and efficiency test
  • Controls and thermostat checked and adjusted
  • Service certificate issued (required by some insurers)
When to call a Gas Safe engineer

Five reasons to book a boiler repair now

Don't wait for a complete breakdown. These signs mean your boiler needs attention from a registered engineer.

Strange smells or sounds

A burning smell, popping noises or loud kettling are warning signs. Stop using the boiler and get it checked; these can mean carbon monoxide or a serious fault.

Losing pressure constantly

If you're topping up the system pressure more than once a month, there's a leak somewhere—inside the boiler or the pipes. We find it and fix it before it damages the system.

The boiler won't stay lit

Ignition problems or a boiler that cuts out after a few minutes often point to a faulty thermostat, a sensor issue or a clogged flue.

It's been longer than a year since service

Most manufacturers expect an annual service to keep the warranty valid. A yearly check-up stops small issues becoming emergencies and keeps your system efficient.

Water pooling around the base

Damp underneath the boiler usually means a leak from an internal pipe or valve. It needs fixing soon to prevent corrosion and inefficiency.

Carbon monoxide warning: Headaches, dizziness, nausea or chest pain near the boiler can signal dangerous CO leaks. Turn the boiler off, open windows, leave the building and call the National Gas Emergency Service on 0800 111 999.

Types of service and repair

What we can do for your boiler

Annual servicing keeps your boiler safe and efficient. If something's already broken, we diagnose it and give you repair costs before we start work.

Annual service

We inspect the whole boiler, test flue gases, check controls, and issue a certificate. Catches faults early and keeps warranties valid.

Duration
Usually 1 to 1.5 hours
Best for
All boilers, especially if it's been a year or more

Emergency repair

Boiler has broken and you've no heating or hot water. We call out same day, diagnose the fault and give you a fixed repair price before starting work.

Hours
24/7, with no callout charge
Best for
Sudden breakdowns when you need heat urgently

Planned repair

You've noticed a problem—loss of pressure, odd noises, poor heating—and want it fixed. We visit, find the cause and quote you before any work happens.

Duration
30 mins to 2 hours depending on the fault
Best for
Issues that aren't urgent but need fixing soon
What we inspect

What happens during a service visit

We follow the Benchmark guidelines so your service is thorough, standardised and recognised by your boiler's manufacturer.

  • Visual inspection of the casing, pipework and connections for corrosion, damage and safety risks
  • Gas pressure test and burner head check for clean, efficient combustion
  • Heat exchanger and fan inspection for blockages or carbon buildup
  • Flue gases tested to confirm correct efficiency and no hazardous spillage
  • Thermostat, timer and control settings checked and reset if needed
  • System pressure and pump checked; relief valve tested
  • Safety devices and gas isolation tested to ensure they work
  • A record of the service issued; any faults logged and explained to you
How a service works

From booking to a signed service record

We keep it straightforward: call us, we arrange a time, we visit and inspect, and you get a certificate and report.

  1. You book a time

    Ring us or use the quote form. Tell us the boiler type and when suits you. We offer weekday, Saturday and emergency slots.

  2. Engineer arrives on time

    We bring test equipment and spares for common parts. Most services take an hour; we'll give you a time window when we confirm the booking.

  3. Full inspection and testing

    We check every safety-critical component, test the flue gases, and confirm the boiler is burning efficiently and safely.

  4. We talk you through findings

    Any faults or wear is explained. If a repair is needed, we quote it there and then; you decide whether to go ahead.

  5. Service certificate issued

    You get a dated record of the service, any work done, and proof for your insurance or boiler warranty.

What affects repair costs

Why repair quotes vary

A service is a fixed job. Repairs depend on what's wrong and what parts need replacing. We always diagnose first and quote before we start.

The part that's failed

A thermostat, sensor or valve costs less to replace than a heat exchanger or gas valve, and some parts are simply more expensive to source.

Labour time

A quick fix takes 30 minutes. Faults deep inside the boiler or that need the case opened take longer.

Age and parts availability

An old boiler might need spares ordered from the manufacturer, which takes a day or two longer.

Whether it's still worth repairing

If a boiler is over 10 years old and the repair costs half the price of a new one, we'll tell you that upfront.

After the service or repair

Keeping your boiler running smoothly

After a service or repair, a few simple checks help you spot the next problem early and keep everything running well.

  • Book next year's service now. Many people forget after a year's passed; a quick call in advance keeps you on track.
  • Watch the pressure gauge. If it creeps up above 1.5 bar or drops below 1 bar between services, let us know.
  • Listen for changes. A new rumble, whistle or rattle is worth mentioning at the next service; we'll investigate.
  • Keep the boiler area clear. Don't block air vents or store things directly against the unit.
  • Test your CO alarm monthly. If you have one, press the test button and replace batteries annually.
  • Run the heating briefly in summer. A few minutes every month keeps pumps and valves from seizing during the off-season.
Questions about servicing and repairs

Boiler service and repair FAQs

Still unsure? Call 01225 123456 and we'll answer any questions about your boiler or heating system.

How often should I have my boiler serviced?

Once a year. Most boiler manufacturers require an annual service to keep the warranty valid. If your boiler is over 10 years old or you've had a repair, annual servicing helps catch the next fault early and keeps everything efficient.

How much does a boiler service cost?

We give fixed prices for a standard service; you won't find any hidden charges. The price depends on the boiler type and your location within our service areas. Call us or use the quote form for an exact figure.

What do you do if you find a fault during the service?

We tell you what it is, explain what it means, and quote the repair cost. You decide whether to go ahead there and then, or book it in later. We never start work without your say-so.

Do you fix boilers that are no longer under warranty?

Yes. We repair all makes and models, whether they're under warranty or not. If a repair doesn't make sense on an old boiler, we'll tell you straight and suggest a replacement instead.

Can you come out same day if my boiler breaks?

Yes. We run a 24/7 emergency service with no callout charge. Call {phone} anytime and we'll get an engineer to you the same day where possible. In winter, demand is high, so call straight away.

What's the difference between a service and a repair?

A service is a scheduled annual inspection and health check of a working boiler; we test everything and issue a certificate. A repair is when something has gone wrong. We diagnose the fault, tell you the cost, and fix it if you ask us to.

Time for a boiler service?

Book a service or emergency repair today

Tell us what you need and we'll fit you in quickly. There's no callout charge and we always quote repair work before starting.